UKBL ~ 10 Second Banner Rotator
View RSS Feed

Jet'n in Texas

Building the Tazor 2.0

Rate this Entry
Thread has moved to: http://www.rcaviation.com/showthread...mposites-Tazor


I got a little bit more done today, I glued in the hatch catch's on the cockpit, and cut and filed the slots in the fuselage, I fitted the tab for the rear hatch that holds the rearward side in, and I also mounted the tab that holds the rear of the cockpit down too. So both the cockpit and the fan hatch are done, except the front center catch for the cockpit that connects into the slot on the "instrument panel" in the front of the cockpit is yet to be done.
Here are some pictures:

Click image for larger version

Name:	catch2..jpg
Views:	326
Size:	138.8 KB
ID:	522 The holes were a little tight.

Click image for larger version

Name:	catch1..jpg
Views:	273
Size:	134.0 KB
ID:	520 I adjusted the size of the holes and now the catch fits fine

Click image for larger version

Name:	slots..jpg
Views:	267
Size:	178.7 KB
ID:	519 The slots are now cut into the fuselage for the cockpit , notice how long the slots are.

Click image for larger version

Name:	closed..jpg
Views:	273
Size:	269.7 KB
ID:	521 Now both the fan hatch and the cockpit are fitted. Really neat how the don't need a hatch latch or anything,

Submit "Building the Tazor 2.0" to Digg Submit "Building the Tazor 2.0" to del.icio.us Submit "Building the Tazor 2.0" to StumbleUpon Submit "Building the Tazor 2.0" to Google Submit "Building the Tazor 2.0" to Facebook

Updated 02-04-2012 at 06:06 PM by Richard Evans

Tags: None Add / Edit Tags
Categories
Build Logs

Comments